Skip to main content
Vaporesso XROS Pro Kit

Vaporesso XROS Pro Kit

Free UK delivery on orders over £35

This listing is the Vaporesso XROS Pro Kit — a rechargeable open pod system with a built-in 1200mAh battery and Type-C 2A charging. It was the first XROS kit marketed with precise wattage control and up to about 30W on the 0.4Ω pod, plus a 0.42-inch OLED for wattage or output level, puff count and battery. Official UK/TPD kit capacity is 2ml. Two starter XROS mesh pods and a Type-C cable are included (resistance pair can vary by UK pack — see Product details). E-liquid is not included.

Product details

Brand Vaporesso
Product type Complete refillable pod kit
Range XROS Pro
Dimensions 24.4 × 18.45 × 119.7 mm
Weight 86 g
Battery 1200mAh built-in
Charging USB Type-C, 2A (about 35 minutes for a full charge per Vaporesso marketing)
Display 0.42-inch OLED (wattage or output level, puff count, battery)
Activation Auto-draw and button (side slide-lock for the fire button)
Power control Precise wattage adjustment with the 0.4Ω XROS pod (up to about 30W); ECO / Normal / Power modes with other compatible XROS pods
Airflow Adjustable slider (MTL to RDL)
Pod platform XROS series (magnetic)
Pod capacity 2ml on UK TPD kits (3ml listed for other markets)
Compatible pod resistances Entire XROS pod series (0.4Ω–1.2Ω where available)
Heating COREX heating technology on supported XROS mesh pods
Pod tech SSS leak-resistant
Starter pods in UK kits Two 2ml XROS mesh pods — commonly 2 × 0.4Ω; some TPD-registered kits listed as 0.6Ω + 0.8Ω
E-liquid included No — fill after priming
SKU 1214

About this kit

XROS Pro steps up battery and control: 1200mAh, Type-C 2A charging and a 0.42-inch OLED that shows wattage or output level, puff count and battery. Official pages emphasise AXON Super Pulse for steadier draws as the pack drains, fine 0.5W control with the 0.4Ω pod (up to about 30W), and ECO / Normal / Power modes on other XROS pods, plus sliding airflow. Dimensions are 24.4 × 18.45 × 119.7 mm at about 86 g. UK TPD kits include two 2ml starter pods and a Type-C cable — common retail packs use two 0.4Ω pods, while some TPD-registered kits are listed as 0.6Ω + 0.8Ω; match the resistances printed on your pack. The wider XROS pod range stays interchangeable.

What's Included

  • ✓ Included: 1 x Vaporesso XROS Pro battery / device
  • ✓ Included: 2 x XROS series mesh pods (2ml UK TPD) — commonly 2 × 0.4Ω; some TPD kits 0.6Ω + 0.8Ω (as printed on pack)
  • ✓ Included: 1 x USB Type-C charging cable
  • ✓ Included: Reminder card
  • ✓ Included: User manual and warranty card (where supplied)
  • ! Not included: E-liquid / nicotine
  • ! Not included: Extra XROS pods beyond the two in the kit (sold separately)

How to Use

Unpack the XROS Pro kit and keep the leaflet for safety and warranty guidance.
Confirm the pre-installed pod is seated, or fit the spare pod from the box. Note the ohm value printed on each pod (UK packs may be 2 × 0.4Ω or 0.6Ω + 0.8Ω).
Open the clamshell top-fill cover and fill slowly with suitable e-liquid. Do not overfill; keep liquid off contacts and the airway, then close firmly.
Wait about 5 minutes after the first fill so the cotton can saturate before vaping.
Power on if needed. With a 0.4Ω pod, adjust wattage precisely (up to about 30W); with other pods, select ECO / Normal / Power. Adjust the airflow slider, then vape with auto-draw or button activation.
Charge with the included Type-C cable when battery is low. Replace the whole XROS pod when flavour fades; buy spare XROS pods separately when needed.

Delivery and returns

Tracked delivery is available. Delivery options, charges and estimated timing are shown at checkout. See our Shipping Policy for full details and our Return Policy for returns. Opened vaping products may not be eligible for return unless faulty.

Frequently Asked Questions

Is this only replacement pods?

No. This listing is the complete XROS Pro kit (device, two starter XROS pods and Type-C cable). Spare XROS pods are sold separately.

What is the battery and charging?

Official specification is a built-in 1200mAh battery with Type-C 2A charging. Vaporesso marketing lists about 35 minutes for a full charge.

What pod capacity does the UK kit use?

UK TPD kits use the 2ml XROS pod format. Vaporesso also lists 3ml pods for other markets; that larger format is not the UK TPD kit capacity.

What is the maximum power?

Official XROS Pro marketing lists adjustable power up to about 30W when using the 0.4Ω XROS pod, with precise wattage steps. Other XROS pods use ECO / Normal / Power modes instead.

Which pods come in the UK kit?

Every UK kit includes two 2ml XROS mesh pods plus a Type-C cable. Many retail packs use two 0.4Ω pods (matching the global packing list). Some TPD-registered colourways are listed as 0.6Ω + 0.8Ω. Use the resistances printed on the pods in your box.

What devices / pods is it compatible with?

The XROS Pro uses the XROS pod platform and is compatible with the entire XROS series of pods (0.4Ω–1.2Ω where available). Extra pods are sold separately.

Is e-liquid included?

No. E-liquid is not included; fill the empty starter pods before use. Nicotine products are age-restricted (18+).

Can I return an opened kit?

Opened vaping products may not be eligible for return unless faulty. See our Return Policy for full terms.

UK Delivery

Tracked shipping on orders across the United Kingdom

Easy Replacements

Faulty items replaced quickly under our returns policy

Secure Checkout

Encrypted payments with major UK cards supported

Specialist Support

Help choosing kits, pods and nic salts from our team